TE Connectivity AMP Connectors AMPMODU Mod II, 16 Position, 1 Row, 0.100" (2.54mm) Pitch, Unshrouded Breakaway Header, Through Hole, Solder Termination, Gold Mating Contact, 3A, -65°C to 105°C
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 16 |
| Contact finish - post | Tin |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 9-146280-0-16: This is a 16-position single-row unshrouded header from TE's AMPMODU Mod II series, pitched at 0.100" (2.54 mm). Gold on the mating face buys you reliable signal contact over repeated insertions — the plating thickness supports hundreds of mate/unmate cycles without fretting corrosion.
Typical mates are AMPMODU Mod II receptacles or any 0.025" square-post compatible socket.
Confirm your plating-cycle requirement before substituting.