Skip to main content
Log in
TE Connectivity AMP Connectors 9-146282-0 — Pin Headers

9-146282-0 TE Connectivity AMP Connectors 40 Position

MPN9-146282-0
Active

TE Connectivity AMP Connectors AMPMODU Mod II, 9-146282-0, Header, Breakaway, 40 Positions, 0.100" (2.54mm) Pitch, Through Hole, Tin Mating Finish, 3A, UL94 V-0

$3.2200Ref. price · indicative, final on quote
RoHSRoHS Compliant
SeriesAMPMODU Mod II
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

9-146282-0 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialLiquid Crystal Polymer (LCP)
Material flammability ratingUL94 V-0

All specifications

9-146282-0 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions40
Contact finish - postTin
Contact length - post0.090\" (2.29mm)
Overall contact length0.410\" (10.41mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

What this 40-position header does for your board layout

Where this header fits in the AMPMODU Mod II family

The AMPMODU Mod II series covers a range of pin counts and plating options. This 40-position, single-row, tin-plated variant is the high-density end of the single-row breakaway line — the 0.100" pitch and 3A rating are consistent across the series, but the 40-position length demands careful board-edge clearance for the full 4-inch span. Compared to a 10-position sibling, the 40-position version requires a longer PCB keep-out zone and a wider routing channel for the signal traces.

Termination is through-hole solder. The 0.090" post length fits standard 0.062" (1.6mm) PCBs with room for the solder fillet. The square post profile (0.025" nominal) accepts standard crimp receptacles or IDC connectors.

Frequently asked questions

What is the pitch of 9-146282-0?

The pitch is 0.100" (2.54mm), which is the standard spacing for AMPMODU Mod II headers and sets the board footprint for routing.

Can 9-146282-0 be used as a breakaway header?

Yes, the connector type is Header, Breakaway. The 40-position strip can be snapped to shorter lengths, down to 2 positions, to match the exact circuit count required.

What is the current rating of 9-146282-0?

The current rating is 3A per contact at 25°C ambient. Derate above this temperature per the AMPMODU Mod II derating curve in the product drawing.

Is 9-146282-0 RoHS compliant?

Yes, the part is RoHS Compliant per the current directive.

Where can I buy 9-146282-0?

Sourced through independent distribution channels.