Board-Edge Pin Header for 7-Position BOMs
The 9-146304-0-07: The tin-plated solder tails (100 µinch) wet reliably during wave or hand soldering. The breakaway design means the 7-position strip is a snapped section of a longer header — the factory loads all positions, so the 7 pins are present and ready.
No official successor or cross-reference from TE Connectivity. The AMPMODU Mod II series remains a standard catalog line, so the 7-position right-angle variant is a stable BOM line for new and sustaining builds.
Comparison with Peer 1394090-1
Key differences: 9-146304-0-07 has 7 positions vs 6, a 0.100" vs 0.112" pitch, gold vs tin mating finish, and an unshrouded vs 4-wall shrouded body. The gold finish on the 9-146304-0-07 supports higher mating cycle life; the shroud on 1394090-1 provides polarization and pin protection. Neither is a drop-in replacement — the pitch and position count differ.
Mates with standard AMPMODU Mod II socket housings and 0.100" pitch receptacle strips — the unshrouded pin header allows direct access for probing or stacking. Termination is solder-only — the 0.120" post length suits through-hole boards up to 0.062" thick.