Skip to main content
Log in
917729-1 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

917729-1 TE Connectivity Signal Double Lock Header, 9 Pos

MPN917729-1
Active

TE Connectivity AMP Connectors Signal Double Lock header, 917729-1, board-to-cable/wire, 9 positions, single row, 2.50mm pitch, shrouded - 4 wall, tin-plated contacts, 3A, 50V, through-hole, kinked pin solder termination, active production.

$1.2800Ref. price · indicative, final on quote
917729-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

917729-1 Technical Specifications
ParameterValue
SeriesSignal Double Lock
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating50V
Current rating3A
Operating temperature-30°C ~ 105°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.602\" (15.29mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Mated stacking heights19.2mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
ApplicationsGeneral Purpose
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions9
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Overall contact length0.626\" (15.90mm)
Contact finish - matingTin
Contact length - mating0.185\" (4.70mm)

Product details

2.50mm pitch, 9-position Signal Double Lock header

Rated 3A per contact at 50V, with tin-plated mating surfaces.

Latch holder retention and board guide

Fastening is via a latch holder, providing positive mechanical retention against cable pull and vibration — a practical advantage in industrial panels or equipment where the cable is routed and tied down.

A common cross-shop is the TE CT series header 1-292164-1, which uses a 2.00mm pitch (vs 2.50mm) and carries 11 positions (vs 9). The CT part is right-angle, while the 917729-1 is vertical through-hole. Both are shrouded and use tin contacts, but the pitch difference means they are not footprint-compatible — the board layout must match the chosen pitch.

Frequently asked questions

What is the pitch of 917729-1?

The mating pitch is 0.098 inches (2.50mm), single row, 9 positions loaded.

What mating connector fits 917729-1?

The 917729-1 is a male pin header from the Signal Double Lock series. It mates with the corresponding Signal Double Lock receptacle housing and crimp terminals (not listed here). Confirm the mating half part number from the same series for a guaranteed fit.