Board-to-wire header with the Signal Double Lock latch
The 2.50mm pitch sets the board footprint and the per-contact current ceiling — at 3 A the temperature rise stays within the UL94 V-0 nylon 6/6 housing limit. The mated stack height is 19.2 mm, which determines the z-height budget in the enclosure.
Mating receptacle and terminal fit
This header mates with the Signal Double Lock receptacle housing (e.g., 917806 series) and accepts the matching crimp terminal (e.g., 917762 series). The kinked pin solder termination provides mechanical retention in the through-hole before soldering — the kink holds the pin in place during wave or hand solder, preventing back-out.