The TE Connectivity 92009-2 is a 2-position receptacle housing from the MIS series, designed as the wire-side half of a wire-to-board or wire-to-wire interconnect. It uses a 2.50mm pitch and accepts female socket crimp terminals that are ordered separately — the housing itself ships without contacts. It mounts free-hanging (in-line), so it terminates a cable assembly that mates with a board-mounted header or a matching plug housing.
What the 2.50mm Pitch and 2 Positions Mean for the Fit
The 2.50mm pitch is the centerline spacing between adjacent contact cavities — it determines the footprint of the mating header and the wire-to-wire plug it pairs with. A 2-position housing at this pitch is a compact, two-circuit interconnect, common for low-current power or signal pairs (e.g., a sensor line, a switch input, or a low-voltage DC feed). The single-row layout keeps the assembly narrow, which helps when routing the harness through tight conduit or along a panel edge.
Contacts Not Included — What You Need to Order Separately
The 92009-2 ships as an empty housing. To complete the connector, you need the matching female socket crimp terminals for the MIS series — these are ordered as a separate line item and crimped onto the wire before insertion into the housing. The housing uses a crimp termination interface, meaning the terminal is mechanically and electrically bonded to the wire by a crimp tool, then locked into the PA66 cavity. Always confirm the correct terminal part number for your wire gauge (typically 20-24 AWG for this series) before placing the full BOM order.