It uses a 5.00 mm pitch, which gives generous creepage distance for the voltage class this connector family typically handles — think appliance, automotive, or industrial control harnesses where the wiring runs between a sensor and a controller. The housing is molded in natural polyamide 6/6 (PA66), rated for continuous operation from -40°C to 110°C, so it lives comfortably in an engine bay or an unventilated cabinet.
If your BOM only lists 928343-2, the harness will arrive with empty cavities. The mating half is a male tab header (also from the Standard Timer series) with a 0.250" x 0.032" blade profile — confirm the tab dimensions against your existing header stock.
How It Packages for the Line
Supplied in bulk packaging — no tape-and-reel, no carrier. That is fine for hand-loaded harness boards or low-volume assembly, but if you are feeding an automated crimp-and-insert machine, you will need to check whether the machine's bowl feeder can handle loose housings. The PA66 material is glass-free, so it does not wear feeder tracks the way a glass-filled nylon would, but the natural colour means optical sensors need good contrast against the feed surface.