Skip to main content
Log in
5103310-1 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

5103310-1 TE Connectivity AMP-Latch Header, 10 Pos, 2.54mm

MPN5103310-1
Active

TE Connectivity AMP-Latch, 10-position, 0.100" (2.54mm) pitch, right-angle, through-hole, shrouded header, male pin, gold or gold-palladium mating finish, 1A per contact, UL94 V-0, tray.

$1.6800Ref. price · indicative, final on quote
5103310-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5103310-1 Technical Specifications
ParameterValue
SeriesAMP-Latch
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.360\" (9.14mm)
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions10
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.135\" (3.43mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

10-position, 0.100" pitch, right-angle — what it fits

Rated 1A per contact with a gold or gold-palladium mating finish at 15.0µinch thickness — enough for signal-level circuits in repeated-mate applications. The tin-plated solder posts (100.0µinch) wet reliably through wave solder.

Mates with AMP-Latch IDC receptacles

This header is the board-side half of the AMP-Latch system. It mates with TE's AMP-Latch IDC socket connectors on 0.100" pitch, 10-position, dual-row. In vibration-prone environments, the four-wall shroud and the friction of the IDC contact beam provide the retention.

RoHS Compliant per TE's current compliance declaration.

How it compares to 1379030-3

The 1379030-3 uses tin mating finish (not gold) and a copper alloy contact material. If your application needs the extra two circuits and a locking latch, that part is the alternative; if gold plating for repeated mating cycles is required, stay with 5103310-1.

Frequently asked questions

What is the mating connector for 5103310-1?

This header mates with TE AMP-Latch IDC socket connectors on 0.100" pitch, 10-position, dual-row. Look for receptacles in the same 51033xx base product number family.