FCI 68705-109HLF BERGSTIK II Header, 9 Pos, 0.100" Pitch

The FCI BERGSTIK® II 68705-109HLF is a 9-position, single-row, unshrouded male pin header on the standard 0.100" (2.54 mm) pitch. It's a through-hole solder termination part — square pins, phosphor bronze base, with a 30.0 µ" gold or Gold, GXT™ finish on the mating surface. The black UL94 V-0 rated housing sits 0.100" above the board. This is the classic breakaway-style header used for board-to-board stacking or wire-to-board connections when mated with a matching receptacle housing. The gold plating thickness supports repeated mating cycles; this isn't a one-and-done connector, it's built for field service or test points where you'll mate and unmate it more than a few times. Unshrouded means the pins are exposed — you need a mating receptacle housing that provides its own shroud or latch. Typical mates are the BERGSTIK II receptacle housings or any standard 0.100" pitch IDC socket strip.