Skip to main content
Amphenol 68705-111HLF — Pin Headers, Sockets & Housings

Amphenol FCI BERGSTIK II 68705-111HLF

MPN68705-111HLF
Active

Amphenol FCI BERGSTIK II, unshrouded board-to-board header, 68705-111HLF, 11 positions, 1 row, 0.100" (2.54mm) pitch, 5A, through-hole solder, gold or Gold GXT 30.0µin plating, 110V, UL94 V-0.

$0.9484Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

68705-111HLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

68705-111HLF additional specifications
ParameterValue
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions11
Contact length - post0.095\" (2.41mm)
Overall contact length0.395\" (10.03mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.200\" (5.08mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol FCI BERGSTIK II 68705-111HLF is an 11-position, single-row, unshrouded board-to-board header on the standard 0.100" (2.54 mm) pitch. It carries male square pins with a 0.200" (5.08 mm) mating length and a 0.095" (2.41 mm) solder post for through-hole termination.

The 11-position count is fully loaded — every pin position is populated, no option for depopulation on this order code. The unshrouded design gives you access to the pins for probing or wire wrapping, but leaves the pins exposed to bending if the mating half is misaligned.

Frequently asked questions

What is 68705-111HLF's listed style on this component line?

The listed style is Board to Board — the connector is designed for direct board-to-board stacking or signal interconnection rather than wire-to-board termination.