Skip to main content
Log in
901-10755 — Amphenol product photo
Amphenol

Amphenol RF 901-10755 SMA Jack, Female Socket, 50 Ohm, 6 GHz

MPN901-10755
Active

Amphenol RF SMA jack, female socket, 901-10755, 50 Ohms, 6 GHz max, 335 V, panel mount bulkhead, solder contact, crimp shield, gold body.

$11.4600Ref. price · indicative, final on quote
901-10755 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

901-10755 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating335 V
Frequency - max6 GHz
Mounting featureBulkhead - Front Side Nut
Cable group1.32mm Coaxial Cable
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

SMA Bulkhead Jack for 1.32 mm Coaxial Cable

The 901-10755: It terminates 1.32 mm coaxial cable with a solder contact and crimp shield termination.

Cable Diameter and Termination

This jack is built for 1.32 mm coaxial cable — the cable group is specified, not a range. The center contact is soldered, and the shield is crimped. You'll need the correct crimp die for that cable diameter to get a consistent shield termination and rated pull-off strength.

It mates with any standard SMA plug (male pin) with a threaded coupling. The threaded fastening type ensures the pair stays mated under vibration — no snap-on or bayonet here. The single-port, bulkhead-mount design is meant to be a fixed panel jack, not a cable-to-cable adapter.

Frequently asked questions

What is the exact cable diameter for the 901-10755?

The 901-10755 is designed for 1.32 mm coaxial cable — that's the cable group specified in the datasheet, not a range.

Is the 901-10755 compatible with standard SMA connectors?

Yes, this SMA jack mates with any standard SMA plug (male pin) using a threaded coupling.