The Amphenol FCI 92634-112HLF is a 12-circuit, dual-row unshrouded header from the BERGSTIK® II series, built on the standard 0.100" (2.54mm) pitch grid. It terminates through-hole in a right-angle orientation, so the mated board or cable assembly runs parallel to the PCB plane — a common layout for edge-mounted I/O or mezzanine connections where height above the board is constrained. The contacts are male pins with 30.0µin (0.76µm) gold on the mating surface, rated 5A per contact at 110V. The black UL94 V-0 rated insulator and push-pull fastening make this a straightforward board-to-board interconnect for controlled environments.
What the ratings mean for the fit
The 0.100" (2.54mm) pitch matches the legacy DIP footprint — this header drops into a standard 0.1" grid layout without a custom footprint. The 5A per-contact rating is genuine for signal-level power distribution, but the unshrouded design means there is no polarization key; the mating receptacle can be installed reversed if its housing lacks a keying feature, which is a common assembly check on the line. The 30.0µin gold plating on the mating surface supports repeated mating cycles without contact fretting — a real advantage for field-serviceable boards where the connector sees more than a few mate-unmate events.
Sourcing and lifecycle
The 92634-112HLF carries an Active lifecycle status — no end-of-life notice, no last-time-buy pressure. No official cross-reference or successor is on record, so the BOM line stands on this exact order code.