Skip to main content
Log in
F300-1B7H1-11036-E100 — Amphenol product photo
Amphenol

F300-1B7H1-11036-E100 FFC/FPC Connector

MPNF300-1B7H1-11036-E100
Active

Amphenol ICC (FCI) Aorora F300 series FFC/FPC connector, 36 positions, 0.50mm pitch, right-angle SMT, ZIF flip-lock actuator, gold-plated bottom contacts, 0.5 A per contact, 50 V rating.

$0.9500Ref. price · indicative, final on quote
F300-1B7H1-11036-E100 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F300-1B7H1-11036-E100 Technical Specifications
ParameterValue
SeriesAorora F300
Mounting typeSurface Mount, Right Angle
Cable end typeNotched
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C ~ 105°C
Housing colorBlack
Actuator colorWhite
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.20mm
Positions36
Contact finish thickness1.97µin (0.050µm)

Product details

The F300-1B7H1-11036-E100: This is a 36-position, 0.50 mm pitch FFC/FPC connector from the Amphenol ICC (FCI) Aorora F300 series. The 2.00 mm height above board keeps the assembly low-profile for tight enclosures. Right-angle orientation places the FFC parallel to the PCB, which helps with board-edge routing and cable management.

ZIF actuation and solder retention for reliable assembly

The connector accepts FFC thickness of 0.20 mm with a notched cable end.

This gold flash is suited for applications with moderate reconnect duty — 30 mating cycles minimum.

Frequently asked questions

Does F300-1B7H1-11036-E100 have ZIF?

Yes, it uses a zero-insertion-force (ZIF) flip-lock actuator. The FFC inserts without force, then the actuator locks the contacts against the pads.

What FFC thickness does this connector accept?

It accepts FFC with a thickness of 0.20 mm and a notched cable end.