Skip to main content
Log in
Amphenol F304-1A7H1-11040-E100 — FFC / FPC Cable Assemblies

F304-1A7H1-11040-E100 — Amphenol ICC (FCI) 0.50mm Pitch

MPNF304-1A7H1-11040-E100
Active

Amphenol ICC (FCI) Aorora F304, 40-position FFC/FPC connector, 0.020" (0.50mm) pitch, ZIF flip-lock actuation, gold-plated bottom contacts, right-angle SMT, 0.5A, 50V, -40°C~105°C.

$1.0400Ref. price · indicative, final on quote
Amphenol F304-1A7H1-11040-E100 datasheet (PDF)
RoHSRoHS Compliant
SeriesAorora F304
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

F304-1A7H1-11040-E100 key specifications
ParameterValue
SeriesAorora F304
MountingSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)

All specifications

F304-1A7H1-11040-E100 additional specifications
ParameterValue
Actuator materialPolyamide (PA9T), Nylon 9T, Halogen Free
Height above board0.098\" (2.50mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions40
Contact finish thickness1.97µin (0.050µm)

Product details

0.50mm Pitch, 40 Positions — FFC/FPC Fit Check

ZIF (Zero Insertion Force) actuation with a flip lock: the actuator opens to accept the FFC without force, then flips down to clamp the contacts onto the pads. This avoids scraping the gold plating on the cable end, which is the main failure mode in non-ZIF connectors. The flip lock also provides positive retention — no secondary latch needed.

Right-Angle SMT with Solder Retention

The actuator is halogen-free polyamide (PA9T).

Cable Compatibility and Operating Range

The cable end type can be straight or tapered — the ZIF mechanism accommodates both. The contact style is bottom contact, meaning the cable's conductive pads face down toward the PCB.

Frequently asked questions

Where can I buy the F304-1A7H1-11040-E100, and how is it quoted?

Submit an RFQ for a firm quote — no stock-holding claim is made on this page.

Is the F304-1A7H1-11040-E100 compatible with 0.5mm pitch FFC cables?

Yes. The ZIF mechanism accepts cables 0.30mm or 0.33mm thick, with straight or tapered ends.

Does the F304-1A7H1-11040-E100 have a ZIF mechanism?

Yes. It uses a Zero Insertion Force (ZIF) flip-lock actuator. The actuator opens to allow the FFC to slide in without force, then flips down to clamp the contacts onto the cable pads.

How many mating cycles does the F304-1A7H1-11040-E100 support?

Rated for 20 mating cycles. The 1.97µin gold flash on the contacts is consistent with this limited-cycle design — suitable for one-time assembly or infrequent rework, not repeated field disconnect.

What is the closest pin-compatible alternative to the F304-1A7H1-11040-E100?

The F304-1A7H1-11040-E100 is an active part; if a replacement is needed, a board spin would be required to match a different pitch or position count.