1.00 mm Pitch, 11 Positions — Right-Angle SMT for Board-Edge FFC/FPC Termination
The F519-1A7A1-11011-E200 is an 11-position FFC/FPC connector from the Aorora F519 series, built on a 1.00 mm pitch. It accepts FPC thicknesses of 0.30 mm and 0.33 mm, and the contact type is bottom-contact — the flex circuit inserts from the top and contacts the lower beam.
Lifecycle status is Active — the part is in current manufacture by Amphenol ICC (FCI) and RoHS compliant.
Tin Plating and 30 Mating Cycles — Fit for Low-Cycle, Cost-Sensitive Interconnects
Tin is cost-effective but wears faster than gold — the 30-cycle rating reflects that. In a product that mates once at final assembly and stays connected, this is not a limitation.
11 vs 10 vs 16 Positions — Same Footprint, Different Circuit Count
The F519-1A7A1-11011-E200 shares its 1.00 mm pitch, 3.10 mm height, right-angle SMT orientation, and tin plating with the 10-position F519-1A7A1-11010-E200 and the 16-position F519-1A7A1-11016-E200. All three accept the same FPC thickness range (0.30 mm and 0.33 mm) and carry the same 0.5 A per-contact rating. The choice comes down to the signal count on the flex circuit.