Skip to main content
Log in
F519-1A7A1-11005-E200 — Amphenol product photo
Amphenol

F519-1A7A1-11005-E200 — Amphenol ICC (FCI) Aorora F519

MPNF519-1A7A1-11005-E200
Active

Amphenol ICC (FCI) Aorora F519 series, FFC/FPC connector, 5 positions, 1.00 mm pitch, right-angle SMT, tin-plated contacts, 0.5 A per contact, 30 mating cycles, solder retention, UL94 V-0 LCP housing.

$0.3100Ref. price · indicative, final on quote
F519-1A7A1-11005-E200 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F519-1A7A1-11005-E200 Technical Specifications
ParameterValue
SeriesAorora F519
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Height above board0.122\" (3.10mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles30
Contact finishTin
FFC, FCB thickness0.33mm
Positions5
Contact finish thickness80.0µin (2.03µm)

Product details

Current, Cycles, and Plating: Signal-Duty Realities

The F519-1A7A1-11005-E200: The tin plating at 80 µinch thickness is cost-effective for low-cycle applications; the 30 mating cycles listed mean this connector is suited for one-time or infrequent disconnect duty, not daily field-service reconnects.

This connector accepts FFC or FPC cable with a thickness of 0.33 mm. The contact type is bottom-contact, meaning the cable's conductive pads face downward when inserted. The cable end type is straight — no bend or offset at the termination point. Termination is solder-only; there is no crimp or insulation displacement option.

Frequently asked questions

Where can I buy the F519-1A7A1-11005-E200 and what is the lead time?

The F519-1A7A1-11005-E200 is available through our independent distribution network. No stock-holding or immediate-shipment claim is made.

What is the pitch and mounting type of the F519-1A7A1-11005-E200?

The pitch is 1.00 mm (0.039") and the mounting type is surface mount, right-angle.

How many mating cycles does the F519-1A7A1-11005-E200 support?

The connector is rated for 30 mating cycles. With tin-plated contacts at 80 µinch thickness, this is suited for one-time or infrequent disconnect duty rather than daily field-service reconnects.