Board Layout Fit: 1.00 mm Pitch, 6 Circuits, Right-Angle Exit
The F519-1A7A1-11006-E200 is a 6-position, 1.00 mm pitch FPC connector from the Aorora F519 series. It terminates an FPC or FFC cable 0.33 mm thick with bottom contacts — the cable inserts from the top and the contacts wipe the bottom-side pads. That 3.10 mm stack height is tight enough for low-profile enclosures but leaves room for a strain-relief clamp if the cable sees any tug. The 30 mating cycles reflect the tin finish: good for one assembly and occasional rework, not daily disconnect.
Lifecycle and Compliance: Active, RoHS, UL94 V-0
Termination and Cable Compatibility
The connector terminates by soldering the SMT pads to the PCB. The cable end is straight — a standard FPC or FFC with 0.33 mm thickness and bottom-side pads. No secondary lock or TPA; the 30-cycle rating assumes the cable is inserted once and left mated.