JST VH series, B10PS-VH, 10-position single-row right-angle header, 0.156" (3.96 mm) pitch, 10 A per circuit at 250 V, tin-plated brass male pins, shrouded 1-wall housing with locking ramp, through-hole solder termination, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | VH |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 10A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.335\" (8.51mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact length - post | 0.142\" (3.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.303\" (7.70mm) |
It carries a 0.156" (3.96 mm) pitch that gives enough spacing for the 10 A per circuit rating without crowding the board layout.
The B10P-VH-B shares the same 10 positions, 3.96 mm pitch, 10 A rating, 250 V rating, locking ramp, and tin-plated brass contacts. The 'S' in B10PS-VH indicates a specific shrouding or keying variant.
The B10P-VH-B shares the same 10 positions, 3.96 mm pitch, 10 A rating, 250 V rating, locking ramp, and tin-plated contacts. Verify the physical fit against the existing panel layout before substituting.
Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock-holding claim is made on this listing.