Skip to main content
Log in
BH7B-XH-2 — JST product photo
JST

BH7B-XH-2 7 Pos, 2.50mm, Shrouded, Tin, Active

MPNBH7B-XH-2
Active

JST XH series, BH7B-XH-2, Board to Cable/Wire Header, 7 Positions, 1 Row, 0.098" (2.50mm) Pitch, Through Hole, Shrouded - 4 Wall, Tin Contacts, 3A, 250V, UL94 V-0

$0.4900Ref. price · indicative, final on quote
BH7B-XH-2 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

BH7B-XH-2 Technical Specifications
ParameterValue
SeriesXH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating250VAC/DC
Current rating3A (AC/DC)
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.559\" (14.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions7
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

7-Pin XH Header — 2.50mm Pitch, Shrouded, Detent Lock

The header mates with JST XH series crimp receptacles (housing + terminal) for a board-to-wire connection.

Through-Hole Mount with Press-Fit Solder Tails

Termination is press-fit, solder — the square pins insert into plated through-holes and are wave-soldered. The 0.134" (3.40mm) post length suits standard 1.6mm PCBs; the board guide feature helps align the header during assembly, reducing skew.

Note: this variant is RoHS non-compliant. If RoHS compliance is required, check the BH7B-XH-2(LF)(SN) suffix variant (not in this listing) or confirm the plating exemption with your compliance team.

Frequently asked questions

Is BH7B-XH-2 RoHS compliant?

No, this specific part number (BH7B-XH-2) is listed as RoHS non-compliant. For a RoHS-compliant version, look for the BH7B-XH-2(LF)(SN) suffix variant.

What housing mates with BH7B-XH-2?

This header is part of the JST XH series. It mates with XH series crimp receptacles — the housing part number follows the pattern XHP-7 (7-position) and uses the SXH-001T-P0.6 or equivalent crimp terminal.