JST Sales America Inc. XH series, Board to Cable/Wire, Header, Male Pin, 8 Positions, 2.50 mm Pitch, Through Hole, Tin Mating Finish, UL94 V-0
| Parameter | Value |
|---|---|
| Series | XH |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.276\" (7.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Mated stacking heights | 9.8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 8 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
The BH8B-XH-2(LF)(SN): The through-hole termination with press-fit solder tails anchors the part to the board during wave soldering.
Rated 250 V, the header suits low-voltage power and signal distribution in consumer appliances, industrial control panels, and similar indoor equipment where the ambient temperature stays between -25°C and 85°C.
Yes. The BH8B-XH-2(LF)(SN) is a shrouded header with a detent lock designed to mate with JST XH series crimp receptacle housings, including the XHP-8. The 2.50 mm pitch and 8-position count match directly.