JST PA series plug housing, PALR-07V, 7 positions, 1 row, 2.00mm pitch, natural PA66, locking ramp, crimp termination, panel mount snap-in, contacts not included.
| Parameter | Value |
|---|---|
| Series | PA |
| Type | Male Pin |
| Mounting | Panel Mount, Snap-In |
| Connector type | Plug |
| Fastening type | Locking Ramp |
| Operating temperature | -25°C ~ 85°C |
| Color | Natural |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Note | Contacts Not Included |
| Pitch | 0.079\" (2.00mm) |
| Package | Bulk |
| Rows | 1 |
| Contact termination | Crimp |
| Positions | 7 |
This housing is the plug (female) half of the PA-series wire-to-board system. It mates with the PA-series pin header — look for the matching 7-position, 2.00 mm pitch header with male pins. Termination is crimp-style: you'll need the correct male pin contacts (JST part number SPAL-001T-P0.5 or equivalent) and a hand crimp tool.
The PALR-07V accepts male pin crimp terminals from the JST PA series, specifically the SPAL-001T-P0.5 contact. The housing ships without contacts — you must order the terminals separately.
The PALR-07V mates with a JST PA-series pin header of the same 7-position, 2.00 mm pitch configuration.