Skip to main content
Log in
XARR-08V — JST product photo
JST

JST XARR-08V XA Receptacle Housing, 8 Pos, 2.50 mm Pitch

MPNXARR-08V
Active

JST XA series receptacle housing, 8 positions, 1 row, 2.50 mm pitch, natural PA66 nylon, panel mount snap-in, latch lock, crimp termination, contacts not included.

$0.2900Ref. price · indicative, final on quote
StockIn Stock (18)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

XARR-08V Technical Specifications
ParameterValue
SeriesXA
GenderMale Pin
Mounting typePanel Mount, Snap-In
Connector typeReceptacle
Fastening typeLatch Lock
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolyamide (PA), Nylon
NoteContacts Not Included
Pitch0.098\" (2.50mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions8

Product details

XA Series 8-Circuit Receptacle Housing for Wire-to-Board Harnesses

The JST XARR-08V is an 8-position receptacle housing from the XA series, designed for wire-to-board interconnects where a positive latch and panel-mount retention are needed.

Panel Mount and Latch Lock for Vibration-Prone Installations

This housing mounts via panel snap-in, so it locks into a cutout without hardware. The latch lock on the mating face clicks onto the matching header, giving positive retention that resists vibration and accidental disconnection — useful for harnesses routed through a chassis wall or inside a moving assembly.

Contacts Are Ordered Separately — Plan the BOM Line

The housing accepts crimp contacts that are inserted from the rear and locked in place; the latch lock then secures the mated pair. For a full harness build, add the terminal part number to the BOM alongside this housing.

Frequently asked questions

What contacts fit XARR-08V?

The XARR-08V accepts male pin crimp terminals from the JST XA series. Contacts are not included with the housing and must be ordered separately.

What is the pitch of XARR-08V?

The pitch is 0.098" (2.50 mm), which matches the standard XA series header footprint.

Is XARR-08V a male or female housing?

XARR-08V is a receptacle housing that accepts male pin contacts, making it the female half of the XA wire-to-board interconnect.

What is the equivalent part to XARR-08V?

The XARR-08VF is functionally equivalent but uses plain panel mount instead of snap-in. For snap-in mounting, stick with the XARR-08V.