1.50 mm Pitch, 14-Position SMT Header — Mini CT Family Fit
The 1-292230-4: Rated for 50 VAC and current limited by wire gauge, this header suits signal and moderate-power interconnects in general-purpose equipment.
SMT Termination and Board Guide for Automated Assembly
Surface-mount solder tails match standard reflow profiles and eliminate the need for through-hole wave soldering. The integrated board guide aids pick-and-place alignment, reducing skew and tombstoning during reflow. The 0.272-inch (6.91 mm) insulation height leaves clearance for components on the board side, while the 0.094-inch (2.40 mm) mating pin length engages fully with the receptacle contact beam.
ROHS3 Compliant per. The beige housing colour is consistent across the Mini CT SMT family, aiding visual inspection on the line.
How It Differs from the CT Series Peer (1-292164-1)
The 1-292230-4 uses the tighter 1.50 mm pitch and SMT mounting, which means a different receptacle and terminal set. If your board layout demands a 2.00 mm pitch or through-hole termination, the 1-292164-1 is the alternative; for the 1.50 mm SMT footprint, the 1-292230-4 is the correct fit.