Dual-Row 24-Circuit Header with 2.20 mm Pitch
The 0.118" (3.00 mm) row spacing gives the dual-row arrangement its width, and the full 24 positions are loaded with male square pins. Rated for 12 VDC systems, this header is designed for low-voltage automotive and powersports electrical distribution — think body controllers, lighting harnesses, instrument clusters.
The contact mating length is 0.217" (5.50 mm), which provides a generous wipe zone inside the receptacle terminal. Tin is the workhorse finish for moderate-cycle, cost-sensitive applications — it mates well with tin-plated receptacle terminals and holds up to the thermal cycling typical of an automotive interior. The brass base material provides adequate spring properties for the pin geometry. The housing is moulded from glass-filled PBT with a UL94 HB flammability rating.
The base product number is 1376111, which covers the family of 2.20 mm pitch headers in this series. The -2 suffix indicates the specific circuit count and plating variant — the sibling -1 suffix carries a different position count or finish, so verify the BOM position count before substituting.