Skip to main content
TE Connectivity AMP Connectors 1586041-4 — Pin Headers

1586041-4 TE VAL-U-LOK Header 4 Pos 4.2mm R/A

MPN1586041-4
Active

TE Connectivity VAL-U-LOK, 4-circuit 2-row right-angle header, 4.20mm pitch, through-hole solder, 9 A per circuit at 600VAC, tin-plated brass contacts, locking ramp, shroud 4-wall, -40 to 105 °C, UL94 V-2 polyamide nylon, bulk pack.

$0.8200Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesVAL-U-LOK
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1586041-4 key specifications
ParameterValue
SeriesVAL-U-LOK
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating600VAC
Current rating9A
Operating temperature-40°C ~ 105°C
Contact materialBrass Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA), Nylon

All specifications

1586041-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-2
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsGeneral Purpose, Industrial, Lighting
Contact shapeSquare
Rows2
Pitch0.165\" (4.20mm)
Positions4
Row spacing - mating0.165\" (4.20mm)
Contact finish - postTin
Contact length - post0.142\" (3.60mm)
Contact finish - matingTin
Contact finish thickness - post80.0µin (2.03µm)
Contact finish thickness - mating80.0µin (2.03µm)

Product details

4.20mm pitch, 4 positions, right-angle — the power header for tight board-to-wire runs

The 1586041-4 is a 4-circuit, 2-row right-angle header from the TE VAL-U-LOK series, with a 4.20mm pitch and 9A per circuit rating at 600VAC. The 4-wall shroud and locking ramp provide positive retention against cable pull — the ramp clicks audibly when the mating receptacle is fully seated, which matters in applications where vibration or service access could otherwise work the connection loose.

Tin is not recommended for frequent unmating or corrosive environments — gold-plated siblings in the VAL-U-LOK family (e.g., 4-1775099-7) exist for higher-cycle or harsher-duty lines. If your BOM calls for gold, the 4-1775099-7 is a direct-form-fit cross-shop candidate — same pitch, same 4 positions, same right-angle through-hole footprint.

Frequently asked questions

What is the difference between 1586041-4 and 4-1775099-7?

Both are 4-position, 4.20mm pitch, right-angle through-hole headers from the VAL-U-LOK series. Gold supports more mating cycles and better corrosion resistance — choose 4-1775099-7 for higher-reliability or frequent-disconnect applications.