TE Connectivity AMP Connectors High Performance Interconnect (HPI) series, shrouded header, 9 positions, 1.00 mm pitch, surface mount, tin-plated contacts, rated 1 A at 50 V, UL94 V-0, operating -55°C to 105°C.
| Parameter | Value |
|---|---|
| Series | High Performance Interconnect (HPI) |
| Type | Male Pin |
| Mounting | Surface Mount |
| Connector type | Header |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -55°C ~ 105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Ivory |
| Insulation height | 0.169\" (4.30mm) |
| Insulation material | Polyamide (PA9T), Nylon 9T |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Industrial, Medical |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 9 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
| Contact finish thickness - post | 120.0µin (3.05µm) |
| Contact finish thickness - mating | 120.0µin (3.05µm) |
The 1734595-9: This 9-position shrouded header from the HPI series uses a 0.039" (1.00 mm) pitch — the tightest in the HPI line for a shrouded SMD header. That pitch drives the PCB trace escape: expect one trace per channel between pads on a single layer, or use via-in-pad for dense routing.
The SMD termination and ivory PA9T housing feed directly into a standard reflow process — no manual handling required for volume builds.
The HPI series is rated for automotive, general purpose, industrial, and medical applications. The 1 A signal rating and wide temperature range (-55°C to 105°C) suit control modules, sensor interfaces, and board-to-cable interconnects in those environments.