6-position, 2.5mm pitch, friction-lock header for wire-to-board
Its 0.098" (2.50mm) pitch and 4.2A current rating suit it for power distribution in compact enclosures, while the shrouded - 4 wall design protects contacts during mating and handling.
Glow wire compliance and rated temperature range
The header is glow wire compliant (IEC 60335-1), a requirement for many lighting and household appliance designs where the connector must not ignite under fault conditions. Combined with the UL94 V-0 insulation rating, it meets the flammability demands of equipment inside an enclosure. The 250VAC voltage rating is consistent with single-phase mains-level applications.
ROHS3 compliant and supplied in bulk packaging. The base product number 1744439 covers the full position range; the dash suffix -6 specifies the 6-position variant.
Mating connector and termination details
Mates with Economy Power 2.5 series receptacle housings (e.g., 174441 series) that accept 20-24 AWG crimp terminals. Through-hole mounting with kinked pin solder termination; the post length of 0.134" (3.40mm) suits standard 1.6mm PCBs.