N Type Jack, 50 Ohm, 11 GHz — Panel-Mount with Weatherproof Gasket
The 082-6330: The white bronze body finish on brass gives it corrosion resistance for outdoor or exposed installations, while the PTFE dielectric keeps insertion loss to 0.15 dB across the band.
11 GHz Bandwidth, 1500 V Rating — Where the Extended Insulation Matters
The 082-6330 carries a 1500 V voltage rating, which is high for a standard N Type — the Extended Insulation feature listed on the part accounts for that. The 11 GHz frequency ceiling is the standard N Type limit; the 0.15 dB insertion loss is consistent across the band, not just at a spot frequency.
Weatherproof Seal — Gasket and Flange Mount for Outdoor Duty
The weatherproof ingress protection rating and the included gasket mean this jack is intended for outdoor antenna feeds, tower-mounted amplifiers, or any RF interconnect exposed to rain and humidity. The flange mount with four-hole pattern (standard N flange) compresses the gasket against the panel face, creating the seal. The white bronze body finish on brass resists salt-spray corrosion better than nickel alone, which matters for coastal or industrial environments.
Solder Termination — Field-Installable, No Crimp Tool Required
That makes this jack a field-serviceable part — no specialized crimp die set needed, just a soldering iron and the correct cable prep. The trade-off is that solder joints are less mechanically repeatable than a crimp, so for high-vibration or thermal-cycling environments, verify the cable strain relief and the solder technique.
500 Mating Cycles — Gold Contact Life for Test and Field Use
The gold-over-phosphor bronze center contact maintains low and stable contact resistance across those cycles; the threaded coupling nut (fastening type: threaded) provides the mechanical retention and consistent torque for repeatable RF performance.
The part ships in Bulk packaging (1 connector, 1 gasket per unit).