Skip to main content
Log in
10051922-1810EHLF — Amphenol product photo
Amphenol

10051922-1810EHLF Amphenol ICC FPC Connector 0.50mm 18 Pos

MPN10051922-1810EHLF
Active

Amphenol ICC (FCI) VLL series, 10051922-1810EHLF, FPC connector, 18 positions, 0.50mm pitch, bottom contact, ZIF slide lock, right-angle SMT, gold flash, 0.5A, 50V, UL94 V-0 LCP housing, halogen free, -55°C to 85°C.

$0.8700Ref. price · indicative, final on quote
10051922-1810EHLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

10051922-1810EHLF Technical Specifications
ParameterValue
SeriesVLL
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~85°C
Housing colorNatural
Actuator colorBlack
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP), Glass Filled, Halogen Free
Actuator materialLiquid Crystal Polymer (LCP), Glass Filled, Halogen Free
Height above board0.051\" (1.30mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions18
Contact finish thickness2.00µin (0.051µm)

Product details

0.50mm Pitch, 18-Position ZIF FPC Connector

The 10051922-1810EHLF is an 18-position, 0.50mm pitch FPC connector from Amphenol ICC's VLL series. It uses a zero-insertion-force (ZIF) design with a slide lock actuator — the FPC slides in without force, then the slide lock clamps the contacts.

0.5A Signal-Level Current and 50V Rating

The 0.50mm pitch and gold flash plating (2.00µin) set the current ceiling; the contact beam and LCP housing keep the temperature rise within limits at rated current. For logic-level buses, display interfaces, and sensor signals, the 0.5A per circuit is adequate.

20 Mating Cycles — One-Time Assembly Duty

With 2.00µin gold flash on the contact face, the plating is sufficient for the rated cycles in a clean environment — not for repeated field reconnection or corrosive atmospheres. In a typical build, the FPC is inserted once during final assembly and rarely cycled again. If the application requires frequent cable swaps, a connector with thicker gold (15µin or more) would be a better fit.

Right-Angle SMT with Solder Retention

The LCP housing (UL94 V-0, halogen free) withstands reflow temperatures without distortion.

Frequently asked questions

What is the pitch of the 10051922-1810EHLF?

The pitch is 0.50mm (0.020"). This sets the landing pattern width on the PCB and the spacing of the FPC conductors.

What FPC thickness does this connector accept?

It accepts FPC with a thickness of 0.30mm. The ZIF mechanism is designed for this gauge; using a different thickness may affect contact force and retention.

What is the difference between bottom-contact and top-contact FPC connectors?

In a bottom-contact connector like this one, the FPC's conductive pads face downward toward the PCB when inserted. The contact beams in the connector wipe the pads from below. Top-contact connectors have the pads facing up. The choice depends on the FPC layout and the board routing.