Skip to main content
Log in
10051922-2010EHLF — Amphenol product photo
Amphenol

10051922-2010EHLF FPC Connector 0.50mm Pitch 20 Pos ZIF

MPN10051922-2010EHLF
Active

Amphenol ICC (FCI) VLL series FPC connector, 0.50mm pitch, 20 positions, bottom-contact ZIF with slide lock, gold flash, surface-mount right-angle, tape & reel.

$0.4464Ref. price · indicative, final on quote
10051922-2010EHLF datasheet
StockIn Stock (15)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

10051922-2010EHLF Technical Specifications
ParameterValue
SeriesVLL
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~85°C
Housing colorNatural
Actuator colorBlack
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.051\" (1.30mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions20
Contact finish thickness2.00µin (0.051µm)

Product details

20-Position FPC Connector for Board-Level Signal Routing

The 1.30 mm height above board keeps the connector low-profile for tight stacking.

Mating Cycles and Contact Plating — What the Numbers Mean

The 2.00 µinch gold flash on the contact surface provides corrosion protection during storage and initial mating but will wear through after a few cycles.

ZIF Actuator and FPC Insertion

The bottom-contact configuration means the FPC pads contact the connector terminals on the lower side — confirm the FPC orientation before insertion.

RoHS compliant.

Peer Position Counts for BOM Fit

The same VLL series offers 24-, 26-, and 28-position variants (10051922-2410ELF, 10051922-2610ELF, 10051922-2810ELF) with identical pitch, height, and plating — only the position count changes.

Frequently asked questions

Is 10051922-2010EHLF RoHS compliant?

Yes, it is RoHS compliant.