The FCI 75160-101-06LF is a 6-position, single-row, unshrouded male pin header from the BERGSTIK® series. It uses a 0.100" (2.54mm) pitch, making it a standard footprint for board-to-board and wire-to-board signal interconnects. The through-hole solder termination suits hand-assembly or wave-solder lines, and the unshrouded design keeps the profile low for tight board stacks. Rated 5A per contact at 110V, the current capacity is typical for signal-level interconnects — the limiting factor is the pin density and the 0.100" pitch, not the contact itself. The 30.0µin gold GXT™ plating on the mating surface handles repeated mating cycles without fretting corrosion, while the phosphor bronze base provides spring retention. The housing is black thermoplastic rated UL94 V-0, and the operating range spans -65°C to 130°C, covering most industrial and telecom enclosure environments.
Sourcing and Lifecycle
The 75160-101-06LF carries an Active lifecycle status from the manufacturer — no end-of-life notice on record. It is RoHS compliant.
Mating and Compatibility
This unshrouded header mates with any standard 0.100" pitch single-row receptacle housing or IDC socket that accepts 0.025" square pins. The push-pull fastening means no locking latch — the retention comes from the contact interference fit and the board-mount solder joints.