14-Circuit FFC Connector with ZIF Slide Lock
The F32R-1A7H1-11014: This is a 14-position FFC connector from the Amphenol ICC Aorora F32R series, pitched at 0.50 mm — the standard spacing for dense signal routing on a PCB. Gold-plated bottom contacts and a right-angle SMT footprint keep the assembly low-profile at 2.00 mm above the board. The 30 mating cycles tell you this is a set-and-forget part for production assemblies, not a field-service connector that gets unplugged weekly.
This connector accepts FPC or FFC with a thickness of 0.33 mm. The contacts are on the bottom side, so the cable's conductor pads face down into the connector body. The slide lock secures the cable without a secondary latch — push the actuator forward after insertion, and it's locked. The natural housing and gray actuator are the standard colour code for this series.
RoHS compliant. The contact finish is gold at 1.97 µinch — a flash plating that meets the signal-integrity needs of low-cycle applications.
The F32R-1A7H1-11014 is the 14-position member of the F32R series. Direct siblings include the 10-position (F32R-1A7H1-11010), 12-position (F32R-1A7H1-11012), and 15-position (F32R-1A7H1-11015) variants. If your BOM calls for 14 signals, this is the one; if you need 15, the -11015 is a drop-in swap on the same footprint.