Skip to main content
Log in
SFV10R-1STBE1HLF — Amphenol product photo
Amphenol

SFV10R-1STBE1HLF Amphenol ICC FFC/FPC 0.50mm Pitch 10 Pos

MPNSFV10R-1STBE1HLF
Active

Amphenol ICC (FCI) SFV-R series, 0.50mm pitch, 10-position, bottom-contact FFC/FPC connector with ZIF flip-lock actuator, gold-plated phosphor bronze contacts, rated 0.5A per contact at 50V, surface-mount right-angle, tape-and-reel packaging.

$0.5200Ref. price · indicative, final on quote
SFV10R-1STBE1HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFV10R-1STBE1HLF Technical Specifications
ParameterValue
SeriesSFV-R
Mounting typeSurface Mount, Right Angle
Cable end typeNotched or Tabbed
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~105°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled, Halogen Free
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled, Halogen Free
Height above board0.071\" (1.80mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions10

Product details

Pitch, Positions, and Contact Side

The SFV10R-1STBE1HLF: 0.50mm pitch, 10 positions, bottom-contact configuration — the flex cable must be inserted with the contact pads facing down toward the PCB, not up. A flipped cable shorts the wrong row. The mating interface uses gold-plated phosphor bronze contacts rated for 20 mating cycles. Gold flash on the contact face handles the wipe during insertion without galling, but the 20-cycle rating means this connector is designed for one-time assembly or infrequent field service, not repeated reconnection.

ZIF Actuator and Cable Thickness

Zero insertion force (ZIF) with a flip-lock actuator: the actuator opens to accept the cable, then flips down to clamp the contacts against the flex pads. The cable end must be notched or tabbed per the FFC/FPC specification, and the cable thickness must be 0.30mm — a 0.30mm flex fits the actuator gap; thicker or thinner cable will not seat correctly or may damage the lock.

Materials and Environmental Rating

The actuator is glass-filled polyphenylene sulfide (PPS), also halogen-free.

Frequently asked questions

What is the difference between SFV10R-1STBE1HLF and SFV10R-2STBE1HLF?

The two part numbers differ in the actuator color or locking feature variant — the base product number SFV10R indicates the same 10-position, 0.50mm pitch, bottom-contact ZIF design. The specific suffix (1STBE1HLF vs. 2STBE1HLF) should be verified against the manufacturer's ordering code table to confirm the actuator color and any locking feature differences.

Does SFV10R-1STBE1HLF have a locking feature?

Yes, the connector has a flip-lock actuator that holds the FFC/FPC in place after the ZIF mechanism is engaged. The lock is part of the actuator assembly — it flips down over the cable to prevent pull-out.