Skip to main content
Log in
SFV10R-2STBE1HLF — Amphenol product photo
Amphenol

SFV10R-2STBE1HLF FFC/FPC Connector

MPNSFV10R-2STBE1HLF
Active

Amphenol ICC (FCI) SFV-R series FFC/FPC connector, 10 positions, 0.50mm pitch, top-contact ZIF, gold-plated contacts, 0.5 A, right-angle SMT, slide lock, active production.

$0.5200Ref. price · indicative, final on quote
SFV10R-2STBE1HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFV10R-2STBE1HLF Technical Specifications
ParameterValue
SeriesSFV-R
Mounting typeSurface Mount, Right Angle
Cable end typeTapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~105°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled, Halogen Free
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled, Halogen Free
Height above board0.071\" (1.80mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesZero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions10

Product details

10-Position, 0.50mm Pitch FFC/FPC Connector with ZIF Actuation

Gold-plated phosphor bronze contacts and a UL94 V-0 halogen-free nylon housing suit signal-level applications where corrosion resistance and flame rating are required. The 0.5 A per-contact rating limits this connector to logic-level signals, not power delivery. The 1.80mm height above board fits tight clearance budgets.

Mating Cycles and Contact Finish: 20 Cycles, Gold Plating

Rated for 20 mating cycles, this connector is intended for infrequent reconnect duty — suitable for factory-assembled harnesses or field-service where the FPC is mated once and rarely disconnected. The gold contact finish prevents oxidation on the mating interface, maintaining low contact resistance over the connector's service life. The 0.30mm FFC/FPC thickness must match the actuator; a thicker or thinner cable may not seat properly or could damage the ZIF mechanism. The tapered cable end type aids insertion alignment.

Operating Temperature and Application Fit

The slide lock holds the FPC under vibration, making it a candidate for automotive infotainment or sensor modules. The 50V voltage rating covers low-voltage signal paths; not intended for mains or high-voltage circuits.

Frequently asked questions

Where can I buy SFV10R-2STBE1HLF and how is it quoted?

No stock-holding claim is made; each request is handled per your volume and delivery needs.

What is the pitch of SFV10R-2STBE1HLF?

The pitch is 0.020" (0.50mm).

Is SFV10R-2STBE1HLF RoHS compliant?

Yes, it is RoHS Compliant, meeting EU regulatory requirements for restricted substances.

What is the mating cycle life of SFV10R-2STBE1HLF?

Rated for 20 mating cycles. This is suitable for infrequent reconnect applications; for higher cycle counts, consider a connector with thicker gold plating or a different contact design.

Does SFV10R-2STBE1HLF require a ZIF (Zero Insertion Force)?

Yes, it features Zero Insertion Force (ZIF) actuation with a slide lock. The FPC is inserted with the actuator open, then locked — no force is applied to the contacts during insertion.

What is the closest functional alternative to SFV10R-2STBE1HLF?

The SFV10R-2STE9HLF is the closest functional second-source — same pitch, positions, and slide lock, but with tin contacts instead of gold. Verify contact finish requirements before substituting.