Six positions at 0.50mm — where this fits on the board
The SFV6R-1STE1HLF: This is a 6-position, 0.50mm-pitch FFC connector from the SFV-R series, terminated by reflow solder to the board. At 0.5A per contact, this is strictly a signal interconnect; don't plan on power delivery through these pins. The ZIF mechanism uses a slide lock, not a flip actuator. Slide the lock forward to insert the FFC, then slide it back to clamp the cable. The lock holds the FFC against the bottom contacts — the cable end needs to be tapered per the 0.33mm thickness spec.
20 mating cycles — plan for infrequent disconnects
Rated for 20 mating cycles. That's low — this connector is designed for a single assembly or occasional field service, not repeated reconnections. The tin contact finish is fine for this duty; if you need frequent mate-unmate, look at the gold-plated variant SFV6R-1STBE1HLF in the same series.
Active lifecycle status from Amphenol ICC (FCI). RoHS compliant.