Skip to main content
Log in
SFV6R-2STBE9HLF — Amphenol product photo
Amphenol

SFV6R-2STBE9HLF FFC/FPC Connector 0.50mm Pitch 6 Pos ZIF

MPNSFV6R-2STBE9HLF
Active

Amphenol ICC (FCI) SFV-R series, SFV6R-2STBE9HLF: 6-position, 0.50mm pitch, right-angle SMT, top-contact ZIF FFC/FPC connector, gold-plated contacts, slide lock, 0.5A, 50V, -55°C~105°C.

$0.6400Ref. price · indicative, final on quote
SFV6R-2STBE9HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFV6R-2STBE9HLF Technical Specifications
ParameterValue
SeriesSFV-R
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~105°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled, Halogen Free
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled, Halogen Free
Height above board0.071\" (1.80mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions6

Product details

Pitch and Position Count Set the Footprint

The SFV6R-2STBE9HLF: At this pitch, routing traces between pads requires a controlled impedance stack-up for signal integrity above a few hundred MHz.

Current and Voltage Ceiling for Signal Duty

The 0.5 A limit is typical for fine-pitch ZIF connectors; exceeding it risks contact heating and housing degradation.

Mating Cycles and Field-Service Reality

With 20 mating cycles minimum, this connector is designed for infrequent reconnection — think factory calibration or module replacement, not daily cable swaps. The gold-plated contacts resist corrosion over the rated cycle life.

ZIF Actuation and Slide Lock for Assembly

Frequently asked questions

What is the pitch of SFV6R-2STBE9HLF?

The pitch is 0.020" (0.50 mm). This is the centre-to-centre spacing between adjacent contacts, which sets the PCB footprint and routing density.

How many mating cycles does SFV6R-2STBE9HLF support?

It supports 20 mating cycles minimum. This is a low-cycle connector intended for infrequent reconnection — suitable for applications where the cable is mated once during assembly and rarely disconnected.

Where can I buy SFV6R-2STBE9HLF?

This part is available through independent distribution channels. Submit an RFQ for a firm commitment.