TE Connectivity AMP Connectors 1-2328724-3, FPC connector, 13 positions, 0.30 mm pitch, bottom contact, flip lock, SMT right-angle, gold-plated contacts, 0.5 A, 30 V, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount, Right Angle |
| Cable end type | Tapered |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 30V |
| Current rating | 0.5A |
| Operating temperature | -40°C ~ 85°C |
| Housing color | Natural |
| Actuator color | Black |
| Contact material | Copper Alloy |
| Housing material | Thermoplastic |
| Actuator material | Thermoplastic |
| Parameter | Value |
|---|---|
| Height above board | 0.039\" (1.00mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.012\" (0.30mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Termination | Solder |
| Contact finish | Gold |
| Locking feature | Flip Lock |
| FFC, FCB thickness | 0.20mm |
| Positions | 13 |
| Contact finish thickness | 3.00µin (0.076µm) |
The 0.30 mm pitch places it at the fine-pitch end of the FPC family, so the board footprint needs careful routing — expect trace widths and spaces around 0.15 mm for a single signal between pads. The 1.00 mm height above board is tight enough for slim enclosures but leaves room for a stiffener on the FPC tail.
The pitch is 0.012" (0.30 mm).
Yes, it is ROHS3 Compliant.
It uses a flip-lock actuator — the front-flip design clamps the FPC tail without a secondary latch.