Termination is surface-mount solder — the pins reflow onto the PCB pads without through-hole anchors. The 0.110" (2.79mm) insulation height above the board sets the standoff; the mating pin length of 0.228" (5.80mm) engages with standard AMPMODU receptacles. Pick-and-place features and tape-and-reel packaging support automated assembly lines.
Gold Flash Mating Surface — Low-Cycle Signal Duty
Flash gold, typically under 5 µinch, provides corrosion protection for the first few dozen matings but wears through faster than thicker gold. For a connector that mates once at board assembly and rarely again, this is a cost-effective choice.
ROHS3 compliant — no exemption-based restricted substances.