TE Connectivity AMP Connectors Multi-Lock series, 174051-2, board-to-cable/wire pin header, 12 positions, 2.50mm pitch, dual-row, right-angle through-hole, tin-plated contacts, locking ramp, -30°C to 105°C
| Parameter | Value |
|---|---|
| Series | Multi-Lock |
| Type | Tab |
| Mounting | Through Hole, Right Angle |
| Fastening type | Locking Ramp |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -30°C~105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.658\" (16.71mm) |
| Insulation material | Polybutylene Terephthalate (PBT) |
| Style | Board to Cable/Wire |
| Package | Tube |
| Parameter | Value |
|---|---|
| Features | Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose |
| Contact shape | Rectangular |
| Rows | 2 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 12 |
| Row spacing - mating | 0.205\" (5.20mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.157\" (4.00mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.276\" (7.00mm) |
The 174051-2: Both the mating and post contacts are tin-plated. Tin is a workhorse finish for applications with moderate mating cycles—typically a few hundred cycles—and is well-suited for environments where the connector is mated during initial assembly and then left in place. The brass contact material provides good conductivity and spring properties for the tab geometry.
The 174051-2 is an active part from TE Connectivity. It is sourced to order against your BOM quantity through our independent distribution network.
The mating half is a wire housing with the same 2.50mm pitch and 12-position, dual-row layout. Confirm the specific receptacle part number against your harness design.
Yes, the 174051-2 is ROHS3 compliant.