Right-angle header for cable-to-board builds
The 176153-4: Its 2.50mm pitch and latch holder fastening suit it for cable-to-wire applications where the connector must resist vibration after mating.
2.50mm pitch, 4 circuits, latch retention
The single-wall shrouding protects the pins during handling, while the latch holder provides a positive lock with the mating receptacle. Compared to the 1-292164-1 from the CT series, this part uses a 2.50mm pitch versus 2.00mm, and a 1-wall shroud versus a 4-wall shroud. The latch holder here is a different mechanism from the detent lock on the CT header.