TE Connectivity AMP Connectors CT series header, 292168-2, 2 positions, 2.00 mm pitch, right-angle through-hole, shrouded 3-wall, detent lock, tin-plated contacts, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | CT |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 125VAC |
| Current rating | Varies by Wire Gauge |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.157\" (4.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tube |
| Shrouding | Shrouded - 3 Wall |
| Termination | Solder |
| Applications | General Purpose |
| Contact shape | Circular |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.177\" (4.50mm) |
The detent lock provides a positive mechanical latch between the header and the mating housing. This is standard for most commercial and industrial enclosures.
Tin is the economical choice for applications with infrequent mating — typically under 50 cycles — and where the operating environment is not corrosive.
The datasheet for the 292168-2 is available from TE Connectivity's product documentation portal. It covers the full dimensional drawing, PCB layout footprint, and material specifications for the CT series header.
The mating pitch is 0.079 inches (2.00 mm), which is the standard pitch for the TE CT series.