40-Position Dual-Row Receptacle for Economy Power 2.5 Harnesses
It uses a 0.098" (2.50mm) pitch and matching 0.098" (2.50mm) row spacing, so the footprint lines up with standard 2.50mm pin headers. The housing accepts crimp terminals (male pins, sold separately) and mounts into a panel cutout with a snap-in fit — no screws or brackets. That snap-in saves a step on the assembly line compared to a flange-mount housing. The 40 circuits fill a dual-row layout, so the connector body stays narrower than a single-row 40-position would be, which helps when routing multiple harnesses through a tight panel opening.
Pitch and Row Spacing — What Fits
Both the pitch and the row spacing are 0.098" (2.50mm), which is the Economy Power 2.5 standard. The 40-position count is the highest in the dual-row EP 2.5 range; a 30-position sibling like the 1-2333134-5 uses a 0.079" (2.00mm) pitch and 0.130" (3.30mm) row spacing, so those two are not footprint-compatible. Stick with 2.50mm-pitch headers for this housing.
Mounting and Termination — Panel Snap-In and Crimp
This is a panel-mount, snap-in receptacle. You cut a rectangular hole to the housing profile, push the connector through until the locking ramps click past the panel edge, and it's retained. No separate hardware.