6.35 mm pitch header for power and signal
Its 6.35 mm pitch (0.250 in) and 12 A per-circuit rating place it in a power-signal crossover zone — the pitch gives enough board area for routing thicker traces, while the current ceiling suits moderate loads like appliance controls, industrial panels, or lighting ballasts. The 4-wall shrouding and locking ramp protect the mating interface: the shroud prevents contact damage during blind mating, and the ramp locks the plug in place against vibration. A mounting flange adds a second mechanical anchor to the board, taking shear off the solder joints when the cable is tugged.
Right-angle orientation and board footprint
The 0.360 in (9.14 mm) insulation height and 0.160 in (4.06 mm) post length set the z-height budget for the mated assembly.