Right-angle 2-position at 5.08mm pitch, 12A
Each tin-plated contact is rated 12A at 250VAC — the current ceiling is set by the contact cross-section and the UL94 V-2 nylon housing, which handles the temperature rise at full load.
Board lock and locking ramp keep it seated
The board lock is a plastic peg that snaps into the PCB hole, anchoring the header during reflow and providing mechanical retention against cable pull. The locking ramp on the shroud engages the mating housing's latch — in a panel with vibration, this prevents the pair from backing apart. The 4-wall shroud also keys the mating half so it can't go in wrong.