What the 3.96mm Pitch Means for Your Board Layout
The 826576-2: The tin-on-tin contact interface (100 µinch on both sides) is rated for low-cycle, non-corrosive environments; expect a few hundred matings before contact wear becomes a concern.
Active Production and Sourcing Status
Mates with AMPMODU Mod I receptacle housings that accept 0.025" square posts on 3.96mm pitch. Green PBT glass-filled insulation (UL94 V-0 rated per series typical) holds up to wave solder profiles. The square pin geometry (0.025" nominal) is standard for crimp-socket or IDC receptacles in the Mod I family.