Skip to main content
Log in
TE Connectivity AMP Connectors 86426-7 — Connector Housings

TE AMPMODU Mod IV 86426-7, 5 Pos Receptacle Housing, 2.54mm

MPN86426-7
Active

TE Connectivity AMPMODU Mod IV receptacle housing, 86426-7, 5 positions, 1 row, 0.100" (2.54mm) pitch, free hanging (in-line), crimp termination, black PA nylon housing, contacts not included.

$2.3100Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 86426-7 datasheet (PDF)
RoHSRoHS Compliant
SeriesAMPMODU Mod IV
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

86426-7 specifications
ParameterValue
SeriesAMPMODU Mod IV
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Operating temperature-65°C ~ 105°C
ColorBlack
Insulation materialPolyamide (PA), Nylon, Glass Filled
NoteContacts Not Included
Pitch0.100\" (2.54mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions5

Product details

86426-7: AMPMODU Mod IV 5-Position Receptacle Housing

Ordering the 86426-7 alone gets you the empty black nylon shell. The mating female crimp terminals — AMPMODU Mod IV socket contacts — must be sourced separately, along with the correct crimp tooling for the wire gauge you are terminating. On the BOM, this shows as a separate line item from the contacts, and the two quantities must match.

The 5-position count is common for sensor interfaces, limit switches, or low-pin-count signal runs where a full 8- or 10-position connector would be oversized.

Sourcing and Supply

For volume builds, the bulk packaging (Bulk, not tape-and-reel) means the housing ships loose in a bag or box — plan for manual handling or bowl-feeding if you are running an automated assembly line. No official second-source cross-reference is on record, though other manufacturers offer 0.100" pitch single-row housings that are dimensionally similar — verify the latch geometry and terminal compatibility before substituting.

Frequently asked questions

Does the 86426-7 include contacts?

No. The 86426-7 is a receptacle housing only — contacts are not included. You must order the matching AMPMODU Mod IV female socket crimp terminals separately.

What is the pitch of the 86426-7?

This determines the mating header pin spacing and the footprint if used in a wire-to-board application.

What contacts are compatible with the 86426-7?

The housing accepts AMPMODU Mod IV female socket crimp terminals designed for 0.100" (2.54mm) pitch housings. The exact terminal part number depends on your wire gauge — consult the AMPMODU Mod IV terminal selection guide for the correct contact.