Skip to main content
Log in
901-10814 — Amphenol product photo
Amphenol

Amphenol 901-10814 SMA Jack, 50 Ohm, 26.5 GHz, IP67, RG-402

MPN901-10814
Active

Amphenol SMA jack, female socket, 50 Ohm, 26.5 GHz, IP67, RG-402 (.141" Semi Rigid), bulkhead rear-side nut, threaded, crimp shield, solder contact, gold center contact, nickel body, -65°C to 165°C, 500 mating cycles.

$18.5000Ref. price · indicative, final on quote
901-10814 datasheet
StockIn Stock (30)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

901-10814 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating333 V
Frequency - max26.5 GHz
Ingress protectionIP67 - Dust Tight, Waterproof
Mounting featureBulkhead - Rear Side Nut
Cable groupRG-402 (.141\" Semi Rigid)
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50 Ohms
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

SMA Jack for RG-402 Semi-Rigid, Rated to 26.5 GHz

The 901-10814: The IP67 rating (dust-tight and waterproof when mated) makes this jack suitable for outdoor antenna feeds, military radio mounts, and industrial RF enclosures where moisture ingress would otherwise degrade the signal path. Shield termination is crimp; the center contact is soldered.

Cable and Mounting Constraints

This jack is designed specifically for RG-402 (.141" semi-rigid) cable. For comparison, the sibling 901-10816 is also an SMA jack with IP67 and 500 mating cycles, but it is built for RG-58 cable and is rated to 6 GHz — a different cable group and a lower frequency ceiling. The 901-10745 uses RG-405 (.085" semi-rigid) and a gold body finish, with a 26.5 GHz rating but solder shield termination. Each variant is cable-specific; the 901-10814 is the.141" semi-rigid option with crimp shield.

Frequently asked questions

What cable is compatible with the 901-10814?

The 901-10814 is designed for RG-402 (.141" semi-rigid) cable. The crimp shield termination and solder center contact match this cable's dimensions. Using a different cable type will not produce a reliable 50 Ohm termination.

Is the 901-10814 a female connector?

It mates with a standard SMA plug (male pin).