0.50 mm Pitch, 15 Positions — the BOM Fit Check
The ZIF flip lock actuates without insertion force — the cable slides in freely, then the actuator clamps the contacts. This avoids the pad damage and bent contacts that happen when a non-ZIF connector is mated off-angle.
This is a signal connector, not a power interconnect. The gold contact finish at 3.00 µinch thickness is a flash grade — adequate for the 30-cycle rated life, but not for repeated field reconnections beyond that count. The 50 V voltage rating matches the signal-level voltages common in FFC / FPC applications — display interfaces, sensor boards, and low-voltage logic interconnects.
Right-Angle SMT with Solder Retention
The 2.00 mm height above board is a low-profile fit for tight z-height budgets. Solder retention features hold the connector body in place during reflow, preventing tombstoning or shift from the paste wetting forces. The housing is natural LCP; the actuator is gray halogen-free PA9T nylon. The actuator material choice avoids the brominated flame retardants that some end-equipment specs restrict.
The base product number is F305-1A7H1, which covers the series variant — the full suffix includes the position count and packaging. No stock-holding claim — sourced through independent distribution channels.