Skip to main content
Log in
F305-1A7H1-11060-E100 — Amphenol product photo
Amphenol

Amphenol ICC F305-1A7H1-11060-E100 FFC/FPC, 60 Pos, 0.50mm

MPNF305-1A7H1-11060-E100
Active

Amphenol ICC (FCI) Aorora F305 FFC/FPC cable assembly, order code F305-1A7H1-11060-E100, 60 positions, 0.020" (0.50mm) pitch, gold-plated bottom contacts, zero insertion force flip lock, surface-mount right-angle, solder termination.

$1.4500Ref. price · indicative, final on quote
F305-1A7H1-11060-E100 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F305-1A7H1-11060-E100 Technical Specifications
ParameterValue
SeriesAorora F305
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions60
Contact finish thickness3.00µin (0.076µm)

Product details

Contact system and mating duty

The F305-1A7H1-11060-E100 is the 60-position member of the Amphenol ICC (FCI) Aorora F305 FFC/FPC cable assembly line. Gold-plated bottom contacts rated 0.5 A per circuit at 50 V. The ZIF flip lock accepts 0.30 mm or 0.33 mm FFC/FPC and holds the ribbon without insertion force on the contacts. Mated height above the board is 0.079" (2.00 mm); the right-angle SMT footprint keeps the cable parallel to the PCB edge.

Plating and cycle life

Gold contact finish at 3.00 µin (0.076 µm) supports 30 mating cycles — sufficient for field-service reconnect duty where the cable is disconnected a few times over the product life.

Frequently asked questions

What is the pitch and position count of F305-1A7H1-11060-E100?

0.020" (0.50mm) pitch, 60 positions.

What FFC/FPC thickness does the ZIF connector accept?

0.30 mm or 0.33 mm flat flex cable.