Skip to main content
Log in
901-10775 — Amphenol product photo
Amphenol

Amphenol RF 901-10775 RP-SMA Jack Male Pin, 50 Ohm, 6 GHz

MPN901-10775
Active

Amphenol RF RP-SMA jack, male pin, 1 port, 50 Ohm, 6 GHz, 335 V, threaded, free-hanging, crimp shield, solder center, gold body, for 1.13mm coaxial cable.

$13.8200Ref. price · indicative, final on quote
901-10775 datasheet
StockIn Stock (24)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

901-10775 Technical Specifications
ParameterValue
Mounting typeFree Hanging (In-Line)
Connector typeJack, Male Pin
Fastening typeThreaded
Voltage rating335 V
Frequency - max6 GHz
Cable group1.13mm Coaxial Cable
Operating temperature-65°C~165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

RP-SMA Jack for 1.13 mm Coax — 6 GHz, 50 Ohm

The reverse-polarity interface means the centre contact is a pin in the jack body — the opposite of a standard SMA jack — so it mates only with an RP-SMA plug (female socket). Rated to 6 GHz at 50 Ohm, it covers Wi-Fi, ISM-band, and short-range wireless links where the cable run is thin and flexible.

This jack accepts 1.13 mm coaxial cable — a common diameter for micro-coax in compact RF assemblies. The free-hanging (in-line) mounting suits it for cable-to-cable or cable-to-bulkhead links where a panel mount is not needed.

An RP-SMA jack will not mate with a standard SMA plug — the pin arrangement is swapped. For a standard SMA system, order the 901-10754; for an RP-SMA system (common on Wi-Fi access points and embedded radios), the 901-10775 is the correct jack.

Frequently asked questions

What cable does the 901-10775 accept?

The 901-10775 accepts 1.13 mm OD coaxial cable. The shield is crimped and the centre conductor is soldered.

What is the mating connector for the 901-10775 jack male pin?

The 901-10775 mates with an RP-SMA plug that has a female socket centre contact. The reverse-polarity interface means a standard SMA plug will not fit.